_______________________________________________________________________

Visco 7000
Premium synthetic motor oil
________________________________________________________________________________

Applications

Visco 7000 0W-40 is a fully synthetic oil suitable for petrol, LPG and diesel powered car and light commercial vehicles.It is particularly suitable for high performance petrol engines operating under severe conditions.
________________________________________________________________________________

Main Benefits

Visco 7000 0W-40 provides the following benefits:
- Outstanding performance, especially in extreme conditions
- Minimal cold-start wear
- Significant fuel savings
- Reduces harmful emissions
- Maintains catalytic converter performance
________________________________________________________________________________

Specifications

Visco 7000 0W-40 meets or surpasses the following specifications:
ACEA A3, B3, B4
API SL/CF
VW 502 00/505 00
MB 229.1
BMW LL 01
________________________________________________________________________________

Storage

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and the obliteration
of drum markings. Products should not be stored above 60°C, exposed to hot sun or freezing conditions.
________________________________________________________________________________

Health, Safety and Environment

Health, safety and environmental information is provided for this product in the Materials Safety Data Sheet. This gives details of potential hazards, precautions and First Aid measures, together with environmental effects and disposal of used products. The British Petroleum Company p.l.c. or its subsidiaries will not accept liability if the product is used other than in the manner or with the precautions or for the purpose/s specified. Before the product is used other than as directed, advice should be obtained from the local BP office.
________________________________________________________________________________

Typical Characteristics
___________________________________________________________________________

Test MethodsUnitsGrade :
________________________________________________________________________________

0W-40

Density at 15 °C ISO 3675,ASTM D1298 kg/m³ 843

Kinematic Viscosity at 40°C ISO 3104/ASTM D445 mm2/s 74

Kinematic Viscosity at 100°C ISO 3104/ASTM D445 mm2/s 12.9

Viscosity Index ISO 2909/ASTM D2270 - 177

Pour Point ISO 3016/ASTM D97 °C <-57

Flash Point (PMCC) ISO 2592/ASTM D92 °C 180

TBN ASTM D2896 10.34

Sulphated Ash ASTM D874 % wt 1.45
________________________________________________________________________________

The above figures are typical of those obtained with normal production tolerance and do not constitute a specification.


This Data sheet and information it contains is considered to be accurate at the date of printing. No warranty or representation, expressed or implied, is made as to the accuracy or completeness of the data and information contained in this publication.



The Seller shall not be responsible for any loss or damage resulting from any hazards or risks identified in the data sheet and which are associated with petroleum products concerned (provided that this disclaimer shall not affect any statutory rights of the Buyer of the petroleum products concerned).
It is the User's obligation to evaluate and use products safely and within the scope advised in the data sheet and to comply with all applicable laws and regulations. No statement made in this publication shall be construed as a permission, recommendation or authorisation given or implied to practice any patented invention without a valid licence.Lubricants UK Limited
Wakefield House
Pipers Way
Swindon
Wiltshire SN3 1RE
United Kingdom

Telephone +44 (0) 1793 512712
Fax +44 (0) 1793 453983
Technical Helpline +44 (0) 8457 660334

________________________________________________________________________________

Date Created: 21/02/2000 09:45:48 Last Modified:21/12/2006